beautypg.com

Power on/off – Posiflex FT-7715 User Manual

Page 14

background image

Part 14

connected there but found inoperable by such messages.

Emergency treatment:

The battery is constructed maintenance free and leak proof. It is well

protected in FT system as long as the ambient temperature remains below
30°C and the ventilation of the FT system remains free. However, should any
accident happen and the sulfuric acid from the battery spills on skin or clothing,
wash immediately with water. If the acid comes in contact with eyes, rinse
eyes with large amount of clean water and see a doctor immediately. A larger
external battery may be connected to give an extended operation. Please check
your dealer about this capability when required.
WARNING:

If there are any signs of over charging or leakage of electrolyte

please contact your dealer immediately

Power Supply

The operating voltage range of the power adaptor should cover the

local power supply for proper operation. The power cable, the power outlet
and any power fusing arrangements must conform to local safety regulations.

Please never do any connection / disconnection when system is still

powered on. Please always keep the system in a free air circulation.

POWER ON/OFF

Power Indicator

The power indicator is the backlight LED module under the logo that

serves for several purposes. The relationship between the indicator status and
other conditions is summarized in the following table:

Indicator Status

System

Status

External

Power

UPS Battery Powering Up

Off

Off

Off

Not present Not possible

Off

Off

Off

Present

Not allowed

Green

Off

On

No influence

Allowed

Blue

On

On

No influence Not required

Blue/flash

On

Off

Activated

Not required

Blue/rapid flash

On

Off

Running at

low capacity

Not required

The LED module indicates Power/Stand By status. When it lights up

in green, it means that the external AC power is standing by with the system
powered off. It turns into blue when the system is powered up. This module
also indicates the status of system working on battery power by flashing in