DiBoss LCD-TV LT-40H6MVH - Manual (Page 38)

37
External
Equipment Connection External
Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
COMPONENT 1 IN / COMPONENT 2 IN
1 Use a component video cable to connect the DVD player’s Y/Pb/Pr jacks to the TV’s,
Y/Pb(Cb)/Pr(Cr) jacks.
2 Use an audio cable to connect the DVD player’s Audio OUT jacks to the TV’s Audio IN
jacks. Be sure to use the upper side of inputs that you used for the video connection.
3 Use the TV/AV button to select COMPONENT1 (or COMPONENT 2) mode.
A/V OUT
1 Connect the Audio outputs(L, R) of the TV to Audio-IN(L, R) of
another displayer or the amplifier system.
- If you connect the amplifier system, you can also play the TV
sound through the stereo amplifier system.
2 Connect the Video output of the TV to Video IN of another
displayer.
The Y/Pb/Pr jacks on your DVD player are sometimes labeled Y/Cb/Cr or Y/B-Y/R-Y. If so,
connect the cables to like colors.
Note