DiBoss LCD-TV LT-40H6MVH - Manual (Page 22)

21
Setting up TV Program Setting up TV Program
Manual Program
Manual Program lets you manually tune and arrange the
Channels in whatever order you desire. Also you can assign a
Channel name with 8 characters to each channel number.
1 Press the MENU button.
2 Select the Setup menu.
3 Select Manual Program menu.
4 Press the CHx xy y button to select Channel .
5 Select the Table menu. Then select a tuner mode with the
VOLÏ Ïq q button.
V/UHF => Cable STD => Cable HRC => Cable IRC
6 Select the Name with CHx xy y button.
Then press the VOLÏ Ïq q button.
7 Press the CHx xy y button repeatedly to edit program
name. You can use the numeric 0 to 9, the alphabet A to z
(capital and small letters.)
a blank and -. With the VOLÏ
Ïq q button you can select in
the opposite direction.
8 Press the CHx xy y button to select the Finetune.
Press the VOLÏ Ïq q button to commence finetuning.
9 Select the Skip with CHx xy y button.
10 Press the VOLÏ Ïq q button to select the “On” or “Off”.
11 Press the CHx xy y button to select the Memorize. Then
press the VOLÏ Ïq q button.
12 Press the MENU button to return to prior menu.
13 Press the TV/AV button to return to normal TV viewing.
Channel
Table V/UHF
0
On
Name
Finetune
Skip
Memorize