DiBoss LCD-TV LT-40H6MVH - Manual (Page 21)

20
Setting up TV Program Setting up TV Program
Once you have preset the program, you will be able to use the
CHx
x/CHy y or NUMBER buttons to scan the program you
programmed.
Program can be tuned using Auto or Manual program menu.
START
Table V/UHF
Auto Program
All programs that can be received are stored by this method. It is
recommended that you use Auto program during installation of
this set.
1 Press the MENU button.
2 Select the Setup menu.
3 Select the Auto Program menu.
4 Select the CHx xy y button to select Table mode.
5 Select a Table mode with the VOLÏ Ïq q button.
V/UHF => Cable STD => Cable HRC => Cable IRC
6 Select the Start menu to start Auto Program.
7 Press the MENU button to stop Auto program.
8 Press the TV/AV button to return to normal TV viewing.