Paso Sound DMA2015 - Manual (Page 7)

PAGE 7
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
DMA2015/2030/2060/2120
FUNCTION SWITCHES AND JUMPERS DEFAULT SETTING TABLE
S102 INPUT 4 (MIC 4) PHANTOM POWER ON - OFF OFF
S103 INPUT 3 (MIC 3) PHANTOM POWER ON - OFF OFF
S104 INPUT 1 (MIC 1) PHANTOM POWER ON - OFF OFF
S108 INPUT 4 VOX 1 - OFF OFF
S110 INPUT 3 VOX 1 - OFF OFF
S114 INPUT 1 (MIC 1) VOX 1 - OFF V1
S115 INPUT 1 (MIC 1) UNMUTE ON - OFF OFF
S111 INPUT 4 (AUX 2/MIC) MUTE 1 - OFF M1
S112 INPUT 3 (AUX 1/MIC) MUTE 1 - OFF M1
S113 INPUT 1 (MIC 1) MUTE 1 - OFF OFF
MAIN PCB JUMPERS (Lower Board)
S203 TEL INPUT VOX 1 - OFF V1
S204 TEL INPUT MUTE 1 - OFF OFF
JUMPER AND JUMPER FUNCTION FACTORY FACTORY
SWITCH ID NO. REFERENCE DESCRIPTION SETTING SETTING
PREAMPLIFIER PCB JUMPERS (Upper Board)
S101 INPUT 4 MIC 4 OR AUX 2 SWITCH AUX 2
S105 INPUT 1 XFMER/DIRECT SWITCH DIRECT
S109 INPUT 3 - MIC 3 OR AUX 1 JUMPER AUX 1
SWITCHES/JUMPERS
S107 MOH/ZONE 1 INPUT SOURCE AUX 1 - AUX 2 AUX 1
MOH/ZONE 1 BOARD JUMPERS
S201 EQ LINK Inserts External EQ between INTERNAL
Preamp Out and Power Amp Input
S202 TONE BYPASS Defeats Front Panel Bass & Treble Controls SWITCH OFF
REAR PANEL SWITCHES
THE FOLLOWING INSTRUCTIONS REQUIRE THE REMOVAL OF THE AMPLIFIER PROTECTIVE COVER AND ARE
PROVIDED FOR USE BY QUALIFIED PERSONNEL ONLY.
TO AVOID THE RISK OF ELECTRICAL SHOCK DO NOT PERFORM ANY INSTALLATION OR SERVICING UNLESS YOU
ARE QUALIFIED TO DO SO. REFER INSTALLATION OR SERVICING TO QUALIFIED PERSONNEL.
CAUTION ! REMOVAL OF THE AMPLIFIER COVER PRESENTS AN ELECTRICAL SHOCK HAZARD
ALWAYS REMOVE THE POWER CORD FROM THE AC WALL OUTLET
PROFESSIONAL AUDIO & SOUND
®
DIGITAL MUSIC AMPLIFIERS