4 set system time, 5 buzzer, 6 view system information – OWON ODP Series User Manual
Page 27: 7 set as default
5.Front Panel Operation
22
5.6.4 Set System Time
Press the System key and enter [System
→Sys Set →SysTime]. Press the ▲ / ▼ key or
turn the knob to set the selected value. Press the ＜ / ＞ key to move the cursor. Press
the
key to confirm.
5.6.5 Buzzer
Press the System key and enter [System
→Sys Set →Buzzer]. Press the
key to turn
on/off the buzzer. When the buzzer is on, an icon
will be shown on the status bar.
You will hear a key tone once a key is pressed down; when the system prompts the
instrument will make a buzzing sound, e.g. cutting off the output due to O.V.P/O.C.P.
When the buzzer is off, an icon
will be shown on the status bar.
5.6.6 View System Information
Press the System key and enter [System
→SysInfo]. You can view the Serial Number,
Software Version and Hardware Version.
5.6.7 Set as Default
Press the System key and choose [System
→Default], press the
key to use the
factory defaults, see table below.
Working Mode
Parameter
Independent
Parallel Series
Plus-minus
CH 1 CH 2
Negative Positive
Normal
status
Voltage
5 V
5 V
12 V
15 V
12 V
12 V
Current
0.5 A 0.5 A
1 A
1.5 A
0.5 A
0.5 A
O.V.P value
5.5 V 5.5 V
12.5 V
15.5 V
12.5 V
12.5 V
O.C.P value
0.6 A 0.6 A
1.1 A
1.6 A
0.6 A
0.6 A
O.V.P/O.C.P status
OFF
OFF
OFF
OFF
OFF
OFF
Timer
status
O.V.P value
15 V
15 V
12 V
24 V
12 V
12 V
O.C.P value
1.5 A 1.5 A
1.5 A
1.5 A
0.5 A
0.5 A
O.V.P/O.C.P status
OFF
OFF
OFF
OFF
OFF
OFF
Menu Item
Defaults
Brightness
9
Screen Saver
OFF
Buzzer
ON