OWON ODP Series - Manual (Page 11)

4.Quick Start
6
⑩ Channel 2 control
area
Blue Volt/CV key: Set the output voltage of Channel 2
Blue Curr/CC key: Set the output current of Channel 2
Blue ON/OFF key: Enable/disable the output of Channel 2
⑪ Output terminals
of Channel 2
Channel 2 output connectors
⑫ Mode key Switch the working mode between Independent, Parallel,
Series and Plus-minus
⑬ Output terminals
of Channel 1
Channel 1 output connectors
⑭ 5V output
terminals
Output fixed 5V , max output current is 3A (5A for ODP3052)
⑮ Power button Turn on/off the instrument
⑯ Channel 1 control
area
Orange Volt/CV key: Set the output voltage of Channel 1
Orange Curr/CC key: Set the output current of Channel 1
Orange ON/OFF key: Enable/disable the output of Channel 1
⑰ Function keys
Record key: Record the current output data as a txt file and
save to USB disk
Recall key: Recall the stored settings file
Save key: Save the current setting parameters
Set key: Enter/exit the setting interface of timing output
Instructions for panel key indicator
ON/OFF key: The indicator will be lighted after you turn on the channel.
Volt/CV key: The indicator will be lighted when the channel is in Constant Voltage output
mode; blinking indicates you are setting the output voltage through the input box.
Curr/CC key: The indicator will be lighted when the channel is in Constant Current
output mode; blinking indicates you are setting the output current through the input box.