Orion System OE217-00 - Manual (Page 4)

Form: ORION-OE217-04-EBUS-DRS-1A.doc
Page 1 of 1
Description
The OE217-04 E-BUS Digital Room Space & Humidity
Sensor is used to sense Space Temperature & Space
Humidity. The E-BUS Digital Room Sensor can be
used with the VCB-X Controller (Orion Part No.
OE335-23-VCB-X; AAON Part No. V04740).
The E-BUS Digital Room Sensor connects to the
controller using E-BUS cables of multiple lengths
connected between the controller and the sensor. The
E-BUS cables should not run in conduit with other AC
line voltage wiring or with any conductors carrying
highly inductive loads.
Mounting
The E-BUS Digital Room Sensor is designed to be
mounted to a vertical, 2” x 4” electrical box recessed in
the wall. If the wall cannot be penetrated, a plastic
surface mount box such as those made by
Wiremold
TM , may be used to mount the sensor to the
wall surface. The Sensor is mounted by removing the
front cover and fastening the housing base to the
electrical box using the supplied (2) 6/32” x 1” machine
screws. The E-BUS cable is then plugged into the E-
BUS connector located on the circuit board that is
mounted on the cover. The cover is then placed onto
the housing base and the Allen Screw on the bottom of
the base is adjusted to hold the cover in place.
MI
CR
O C H IP
P IC 24HJ
256G
P 2 06
4
.55”
2.80
Front View Side View
Back View
0.69
1.00
1.81
1.8
7
0.49
Remote Thermistor
Sensor Connector
0.
81
+12Vdc
GND
-COM
SHLD
Cover Set
Screw
E-BUS Cable
Connection
Technical Data OE217-04 E-BUS Digital Room Sensor
Sensor Element Digital Sensing Device Accuracy RH +/-2%, Temp +/- .5
F
Sensor Reading
Range 40
F to 120F
RH = 0-100%
Connection E-BUS
Ambient
Temperature
Limits -40
F to 180F Weight 3.2 oz.
Three Year Warranty WattMaster reserves the right to change specifications without notice
OE217-04
E-BUS Digital Room Sensor