beautypg.com

Schedules, Viewing and setting schedules, Smts ii for gpc-xp technical guide 16 – Orion System System Manager TS II For GPC-XP User Manual

Page 16

background image

SCHEDULES

SMTS II for GPC-XP Technical Guide

16

Viewing and Setting Schedules

Viewing and Setting Schedules

You can view and set schedules from GPC-XP Status Screen #6. You
can set up to 8 different schedules. See Figure 28 below.

To set a schedule, touch the

or

button to the right of the

Schedule #. The Week Schedules Screen will appear. See Figure 29.

The default day will be Sunday and the default event start/stop times
will be midnight.

Figure 28: Status Screen #6 - Schedules

Figure 30: Schedule Times Screen

A Level 2 user can set two schedules per day for individual days
of the week, all weekdays, weekends, and holidays. All times are
entered in military time format.

If you wish to enter a schedule for a certain day of the week, fi rst
touch the day of the week at the top of the screen. Otherwise, the
day defaults to Sunday.

Touch

the start and stop time for each Event and enter the desired

times. See Figure 29. All times must be entered in military time
format. See the Military Time Table in the Appendix, page 20.

Touch

to save the time you entered or touch

to exit the

Schedule Times Screen

without changing the time and return to the

Week Schedules Screen (Figure 29).

To eliminate a schedule from any event, simply enter a zero for the
Start and Stop time for that day. The screen will display 12:00 am
for both the Start and Stop times, indicating that the equipment will
not activate on that day.

Once back at the Week Schedules Screen, you can continue setting
schedules day by day or use following options:

SEND TO

- Touch this button to send the schedule ap-

pearing on the screen to all days of the week, except for holidays.

SEND TO

- Touch this button to send the schedule

to weekdays only. You will need to set up a separate schedule for
Saturday and Sunday when selecting this option.

CLEAR

- Touch this button to clear all schedules.

SET <24 Hr Mode>

- Touch this button to have the system run

continuously, 24 hours a day, 7 days a week including holidays. All
event times will display 11:59 PM.

Figure 29: Week Schedules Screen