Orion System System Manager TS II For GPC-XP - Manual (Page 15)

SMTS II for GPC-XP Technical Guide
GPC-XP CONTROLLER SCREENS
15
Figure 22: Relay Output Force Mode Screen
Figure 26: Outdoor and AVC Status Screen
Figure 27: Schedules and Holidays Screen
Figure 23: Analog Outputs Screen
Figure 24: Analog Output Detail Screen
Figure 25: Analog Output Force Screen
Relay Output Force Modes, Analog Outputs, and Analog Force
Relay Force: You can now select the radio button for the force
mode—Normal Operation, Force Relay On, or Force Relay Off.
Runtime Reset: You can also touch the Runtime Hrs and Runtime
Minutes data fi eld to reset Runtimes (Figure 21).
Analog Outputs: From the Analog Outputs Screen (Figure 23)
you can access the detail screen by selecting one of the data fi elds.
In the example below (Figure 24), Tower Fan Speed is selected.
Force Analog Output: From the Analog Output Detail Screen
(Figure 24), you can access the Force Screen (Figure 25 above)
by selecting the Force Value data fi eld. Enter a percentage between
0 and 100. Enter -1 to Cancel the Force Mode.
Outdoor and AVC Status: This screen (Figure 26) is for view-
ing only.
Schedules & Holidays: Refer to the next section for instructions.