Orion System System Manager TS II For GPC-XP - Manual (Page 10)

Zone
Zone
MAIN SCREEN FUNCTIONS
SMTS II for GPC-XP Technical Guide 10
Editing Passcodes
Passcode Clearance Levels
Below is a list of the passcode levels, default codes, and actions that
can be performed at the various levels.
Level 0—No Passcode Needed, System
Secured
Level 0 users can view status screens. They can also
change the system date and time. No other changes can
be made at this level.
Level 1—Default: 1111
Level 1 users can view status screens. They can also
change the system date and time. A level 1 user can also
temporarily override a schedule.
Level 2—Default: 2222
Level 2 users can view status screens. They can also
change the system date and time. Level 2 users can also
set schedules and holidays and temporarily override a
schedule.
Level 3—Default: 3333
Level 3 users have system manager access and can
change all confi gurations, including default passcodes.
Level 3 users can also access force modes. This Level
is normally reserved for qualifi ed HVAC service per-
sonnel.
Edit Passcodes
WARNING: MAKE SURE YOU CHANGE ALL PASS-
CODES AS SOON AS POSSIBLE TO SECURE THE
SYSTEM!
NOTE: Only a Level 3 user (system manager level) can change
Level 1, 2, and 3 passcodes.
NOTE: Do not use the same passcode for all 3 levels. If you do,
each passcode will default to Level 1.
From the Main Screen, touch the < User Pass-
codes> icon. The System Manager Passcode Levels
Screen will appear. See Figure 8.
To change a passcode, touch the blue highlighted box containing
the current passcode. The keypad will appear with instructions for
changing the passcode. See Figure 9.
The current passcode will appear on the top menu bar. Type in the
new four-digit passcode. You cannot use the period or minus char-
acters in your passcode. Use the
< << > key if you make a mistake.
Touch to return to the previous screen without changing the
passcode. When you have typed in the new passcode, touch .
The System Manager Passcode Levels Screen should now display the
passcode that you entered.
NOTE: If you change the Level 3 passcode, make sure to write
it down. If you should happen to forget the Level 3
passcode, contact WattMaster Technical Support.
Touch to return to the Main Screen.
Figure 8: System Manager Passcode Levels Screen
1111
Passcode Levels
You can limit access to critical settings
by giving the user access only to those
items needed to maintain comfort levels
or to modify operating hours.
All critical setpoints and configurations
are protected by Level #3 and should not be
accessed except by a service technician. Level #1 Passcode
{ Temporary Schedule Overrides }
2222
Level #2 Passcode
{ Can change Schedules & Holidays }
3333
Level #3 Passcode
{ Can change All Setpoints } Back
Enter the 4 digit Passcode
for the required Level.
Esc 1 2 3
4
7
- 0
.
9 8
5 6
OK
<<
Currently: ****
DATA ENTRY
Level #1:
Can temporarily override schedules.
Level #2:
Can change schedules and holidays.
Level #3:
Can change user passcodes and
access force modes.
Figure 9: Change Passcode Screen