OnLine Power Battery Backup System - Manual (Page 65)

OLP
Three Phase UPS Systems
7.0 OPTIONS
7-3
7.4. Software for PC Monitoring – UPSCOM
TM
UPSCOM
T M
is a hardware/software combination installed on a PC to monitor
multiple UPS's with DB9 connection in series. The connector on the UPS’s side is
RS-485 (for long distance transmission); therefore an RS-485
Ù
RS-232 adapter
(hardware) is required to modify the signal. The software and hardware together
form a package called UPSCOM
TM
. See the UPSCOM
TM
specification for further
information.
7.5. Auto Dialing Module – UPSCALL
T M
In case abnormal situations occur, UPSCALL
TM
will automatically dial specified
phone numbers to inform management to take prompt action. The module, with
built-in 23A12V battery, consumes power only when in the process of dialing so
as to be operated under AC source failure. Furthermore, with functions of
multiple phone number setting and dialing, UPSCALL
TM
has no need of
dedicated lines, and can offer user a prompt and convenient way for monitoring
the UPS. See the UPSCALL
TM
specification for further information.
7.6. Battery Monitoring Module - DCMAN
TM
DCMAN
TM
is an intelligent module for watching each individual battery in the
battery bank in a simple and direct way. DCMAN
TM
can distinguish for repair the
initially aged battery under safe conditions, thus prolonging the battery life
expectancy. One module can monitor up to 64 pieces of 12V battery. DCMAN
will sound an alarm in case of an abnormal situation, such as battery failure, cable
abnormal disconnection, or if the remaining battery charge is less than the
parameter set in the module. See the DCMAN
T M
specification for additional
information.