Olson Technology OT-1000-HH Rev.X4 - Manual (Page 13)

025-000573 Rev. X4 - 13 - www.olsontech.com
NOTICE
Do not touch the surface with your fingers when cleaning.
Plug pins with imprinted grooves on the front must only be daubed clean using a
brush.
Dust or fluff can be blown away using the rubber bellows or dust–free compressed
air.
Cleaning the plug pins
1 2 3
1) Fold the cleaning cloth three times. The cloth pad now
constitutes an eight–layered cloth.
2) Moisten the folded cloth a little using the cleaning fluid,
ensuring that a dry area remains.
3) Place the front surface of the connector, or the connector
shaft on the moistened part of the cloth, pressing lightly.
Let the cleaning fluid work into the dirt for a short time.