DirecTV ProScan DSS Receiver - Manual (Page 65)

Reference
63
AUX RF ANT IN D-VHS
OUT
TO
TV
IN
FROM
ANT
S-VIDEO VIDEO R L AUDIO WIDE BAND DATA
REMOTE IN
SATELLITE IN
PHONE JACK
VCR CONTROL
LOW SPEED DATA
Back Panel Controls
IN FROM ANT Use to connect an off-air antenna or cable TV signal to the
DSS
® system.
OUT TO TV Use to connect the DSS ® receiver to your TV. However, if your
TV has audio/video jacks, you should use those jacks to get better picture
and sound quality.
D-VHS Use to connect the DSS ® receiver to a compatible D-VHS VCR with
a digital audio/video (DAV) cable.
S-VIDEO Provides the best picture quality. If your TV has S-VIDEO
capability, use this jack along with the audio/video jacks to connect the
DSS
® receiver to your TV.
VIDEO Provides better picture quality than the OUT TO TV jack. If your TV
has audio/video capability, use this jack to connect the DSS
® receiver to your
TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If
your TV has audio/video capability, use these jacks to connect the DSS
®
receiver to your TV. You must also connect the VIDEO jack.
AUX RF ANT IN Use to connect an optional RF antenna for RF remote
signals. Connecting an antenna extends the remote’s range.
WIDE BAND DATA PORT This port allows you to connect the DSS ® system
to future services and accessories. A shielded cable and additional hardware
may be required.
LOW SPEED DATA PORT this port allows you to connect the DSS ® system
to accessories, such as the Home Control base module.
SATELLITE IN Use to connect the DSS ® receiver to the satellite dish antenna.
PHONE JACK Use to connect a phone line to the DSS ® receiver. The DSS ®
system requires a phone line connection to periodically call out to program
providers.
VCR CONTROL Allows the receiver to control your VCR.
REMOTE IN Use in conjunction with a remote control signal sender.