DirecTV ProScan DSS Receiver - Manual (Page 53)

The Menu System
51
RF Remote Setup The remote can control the DSS ® receiver using
both IR (Infrared) signals and RF (radio frequency) signals. IR signals
require line of sight to the receiver’s front panel remote sensor. RF
signals can control the receiver from other parts of your house–even
through walls.
Occasionally, due to interference or other RF devices, you may need
to change the remote and receiver RF code. To change the code,
follow the on-screen instructions.
Picture Size The Picture size display screen allows you to choose
between a standard TV screen and a Cinema option. A standard TV
screen has an aspect ratio of 4:3; the Cinema option has an aspect
ratio of 16:9.
Data Port Let’s you choose whether the low speed data port is used
for low speed data or communicating with the Home Control Base
accessory. See the Home Control section in this book for more
information.
Alternate Audio
When you select Alternate Audio from the Options menu, the
Alternate Audio display screen comes up.
Point to the audio language or audio type you want and press
MENU•SELECT. The DSS
® system will then automatically set the
audio program to the selected audio program type when that type is
available.
There are two ways to change the audio:
• Press ALT AUD on the remote to temporarily change the Audio
program while tuned to the current channel.
• Point to Alternate Audio from the Options menu and press
MENU•SELECT to set the default Alternate Audio.
Alternate Data
Selects from among the available data on the current channel.