DirecTV ProScan DSS Receiver - Manual (Page 17)

First Things First
15
Selecting a VCR Type
When you connect a VCR Controller, you need to tell the DSS ®
receiver which VCR brand you are using.
1. Press MENU•SELECT on the remote to bring up the Main menu.
2. Point to Options and press MENU•SELECT.
3. Point to System Options and press MENU•SELECT.
4. Point to Set VCR Type and press MENU•SELECT.
The Set VCR Type screen lets you enter a code for
your VCR.
5. Use the arrows or digit keys to input the correct code for your VCR
brand. The VCR codes are located in the “Reference” section of
this book.
6. Follow the on-screen instructions to ensure that you are using the
correct code. If the VCR automatically stops, then you know that
the receiver and the VCR are communicating.
• Some VCR brands may not be capable of being controlled by the
DSS
® receiver.