Nevion UDC-3G-XMUX4+ - Manual (Page 55)

UDC-3G-XMUX4+ Rev. C
nevion.com | 55
Output alignment jitter SD: <0.15 UI
HD: <0.15 UI
3G: <0.3 UI
AES I/O
Number of inputs/outputs 4
Connectors WECO
Output jitter <0.0025 UI peak
Impedance 110 Ohm transformer balanced
Input audio data rate 24 kHz to 100 kHz, converted to 48 kHz if not isochronous to
either SDI input or sync input.
Embedded audio word
length 24 bits
Embedded audio Channels
status As received when isochronous, otherwise replaced by a static
value.
Maximum delay line 28368 audio samples (48 kHz)
Supported standards
SD, 270 Mbps SMPTE 259M, SMPTE 272M-AC
HD, 1485 Mbps
3G, 2970 Mbps SMPTE 292M, SMPTE 274M, SMPTE 291M, SMPTE 296M,
SMPTE 299M
SMPTE 424M, SMPTE 425, SMPTE 291M, SMPTE 299-0,
SMPTE 299-1
Color space conversions BT.601, BT.709
Video switch point definition
and sync SMPTE RP168 (tri-level), SMPTE 170m, ITU-R. BT.470
AES AES3-1996
Optical SMPTE 297M, SMPTE 292M
EDH Compliant to SMPTE-RP165
Video Payload Identification
Time Code
Closed Caption
MPEG Messages
Audio Metadata SMPTE 352M-2002
SMPTE12M
SMPTE334, CEA-708, CEA-608
SMPTE2010
SMPTE2020
2
Power consumption (+5 VDC)
Maximum power, at 50°C 9.0 W 3
Deduct for no optical input 0.5 W
Deduct for no AES option 0.8 W
2 Only one stream is transported in the first release. Full SMPTE2020 compliance will be added in FPGA release 1.60.
3 Actual power consumption varies considerably with the combination of input and output video standards used. Please see the
complete table in “Power requirements”, chapter 2.1.