Udc-3g-xmux4+ rev. c – Nevion UDC-3G-XMUX4+ User Manual
Page 47
UDC-3G-XMUX4+
Rev. C
nevion.com | 47
dly
3
dly 3 42sps
'tgt'
sps
audio delay for input AES 2
The audio delay is given in audio
samples. Audio delay is always
given relative to input AES 2.
dly
4
dly 4 42sps
'tgt'
sps
audio delay for input AES 3
The audio delay is given in audio
samples. Audio delay is always
given relative to input AES 3.
dly
5
dly 5 42sps
'tgt'
sps
audio delay for input AES 4
The audio delay is given in audio
samples. Audio delay is always
given relative to input AES 4.
dly
6
dly 6 1lines -
30sps
'phase'
Video phase
If lines != 0 the resulting phase
will vary with incoming video
standard, see dly 0 above.
emb
0-3
en | dis
acp ( on | off )
use24 ( on | off )
del (off | (on
emb 0 en
emb 2 dis
emb 1 acp on
emb 3 acp off
emb 1 use24 on
emb 2 use24 off
emb 0 del off
emb 2 del on 54 -
432
(en | dis) use24 (on |
off) acp (on | off) del
(off | (on
Audio embedder block
en/dis: Enables or disables the
embedding of the group into the
ancillary area.
acp on/off: This is valid only for
SD and enables the audio control
package.
use24 on/off: This is only valid
for SD and selects between 24bit
and 20bit sound.
del off/on delay12 delay34: For
each of the embedder groups the
delay bits for ch1+2 and for ch3+4
can be inserted into the ACP. The
delay value can be positive and
negative and is put directly into the
ACP as it is written.
Note: To set both delays to 0
would be the same as turning the
delays off. The response reflects
this.
gpi
0
act |
inact
gpi 0 act
gpi 0 inact
WSS interpretation
inact: Normal WSS
act: WSS Extended
gpi
1
act |
inact
gpi 1 act
gpi 1 inact
Color space conversion disable
inact: auto (convert when needed)
act: disabled
gpi
2
act |
inact
gpi 2 act
gpi 2 inact
EDH insert select
This gpi works as a simple 2:1
switch.
inact : EDH off
act : EDH on
gpi
3
act |
inact
gpi 3 act
gpi 3 inact
Closed caption (CEA 708)
disable
act: Insertion disabled
inact: Insertion enabled
gpi
4
act |
inact
gpi 4 act
gpi 4 inact
Closed caption (Line 21) disable
act: Insertion disabled
inact: Insertion enabled
gpi
5
act |
inact
gpi 5 act
gpi 5 inact
Time code (ATC) disable
act: Insertion disabled