Nevion UDC-3G-XMUX4+ - Manual (Page 39)

UDC-3G-XMUX4+ Rev. C
nevion.com | 39
Figure 29: Multicon GYDA view of the delay settings. The video is delayed 1 frames compared
with the de-embedded audio for a 50Hz signal.
3.18 Audio cross point matrix
The audio cross point matrix is an 8x10 cross point with inputs and outputs as shown in
Figure 28. The 8 de-embedded channels, a 1 kHz sine and mute
are selectable inputs. Mute
is explained in Chapter 3.3. The outputs of the cross point are 8 stereo channels for re-
embedding, 0-4 AES outputs (depending on I/O configuration) and 1 data output.
Figure 30: Multicon GYDA configuration view of the audio cross point matrix
All embedded outputs have a common fallback option that can be set in Multicon GYDA. The
priorities can be selected between matrix (being the choice from the cross point matrix), sine,
mute
or delete. Mute selects internal silence generator and Delete deletes the audio content
and set the audio control package to channel delete for its respective channels.