NavCom SF-2040 Rev.E - Manual (Page 23)

SF-2040 User Guide - Rev. E
the battery status as per Table 6, typically for duration
of 20 to 30 seconds.
Battery Status
Battery Not Installed, or
Battery Installed but drained.
Greater Than 80% Remaining
60% - 80% Remaining
40% - 60% Remaining
20% - 40% Remaining
Less Than 20% (Solid; No Blink Rate)
In Use LED (s) Blink Rate at 5Hz
Not In
Use
LED (s) Blink Rate at 1Hz
Table 6: Battery Status LED Indicator
‡
The Battery lights are software configurable via the
appropriate NavCom proprietary command. The
factory default
LED states are described in Table 6.
‡
Batteries are NOT charged in the unit! If external
power is applied, the battery LEDs will indicate the
status of the batteries and NOT the external power
source.
2-21