beautypg.com

Figure 18: gnss receiver window – NavCom SF-3050 Rev.A User Manual

Page 33

background image

SF-3050 User Guide – Rev A

1-31

Refer to Figure 18 for the step below:

37. Click the Refresh button on the GNSS Receiver

window. This ensures that the loaded Software
Options are displayed in the window.

If any of the purchased Software Options
are not displayed in the GNSS Receiver
window, immediately contact NavCom
Customer Support. Refer to the beginning
of this chapter for contact information.

“StarFire: Option Enabled” indicates
that the StarFire Software Option is
loaded. It does not indicate that a
StarFire License is installed.

Figure 18: GNSS Receiver Window