NavCom SF-3050 Rev.A - Manual (Page 20)

SF-3050 User Guide – Rev A
1-18
Product Configuration Files
All the files needed to setup the ordered configuratio
of the SF-3050 are included on the SF-3050 Product
Configura n
1)
a
’s
ad

Flash Drive or by email.

Refer to Chapter 5/User Profiles for details.
tion USB Flash Drive (P/N 82-043000-0
or provided by email, depending on how the dealer
00
order was fulfilled. The main product configuration
es are:
Firmware (*.s19): The most current firmware.
fil


Software Options (*.lic): The options enable the
functionality of the SF-3050. Software Options
may be purchased in a bundle and/or individually.
tarFire License (*.dat): The SF-30

S 50 is hardware
ready for StarFire. The StarFire License and the
St rFire Software Option are required to enable
StarFire Subscription Service.
The StarFire Software Option is standard for
the SF-3050 G, S, and M Software
the

Bundles,
and may also be purchased individually. The
StarFire License is a purchased item in addition
to the StarFire Software Option.

StarUtil-3000 (Starutil-3k_v1_0_x.exe): NavCom
Windows-based control program is used to uplo
the product configuration files.
USB Driver (navcomx1c45x3050.inf)
User Profiles (*.npt): The SF-3050 is already
configured with a factory default User Profile. If
esired, replace the fact

d ory default user profile
with a predefined profile, or create a profile.
Predefined User Profiles are available on the USB