Montigo DHS - Manual (Page 18)

Page 18
Hotshot Gas Fireplace Insert
XG0511 - 150203
Maintenance
Troubleshooting
The following is a troubleshooting chart of possible problems:
PROBLEM CORRECTIVE ACTION
Noisy Pilot Flame Locate pilot adjustment screw on gas
control valve. The flame is decreased
by turning adjustment screw clock-
wise.
Pilot won’t ignite Disconnect remote wires and try to
light pilot. If pilot now works, remote
connections are faulty. Check wiring
diagram figure 13.
Main burner will 1. Check wiring (see figure 13).
not light 2. Check wall switch for proper con-
nection.
3. Check high limit switch.
If your fireplace still does not operate correctly, consult your dealer or the manufacturer.
All service and repairs should be performed by a qualified agency.
All spare parts and optional such as trim finishes and the wireless infrared remote control are available from your local dealer or the
manufacturer.
Replacement Parts
Standing Pilot - Replacement Parts List
Hotshot DHS Insert
NG Gas Valve
RGC1044R
LP Gas Valve
RGC1043R
NG Pilot
RPA024
LP Pilot RPA025
NG Burner
Contact Local Montigo Dealer
LP Burner
Thermocouple
RPG001
Thermopile RPG001
Piezo Ignitor PIEZO
Pilot Tubing RPTA03
Door RDHS
Replacement Screen RSCDHS
Log Set RLGS19