MMD Equipment 185S-6C1 - Manual (Page 22)

4. Operation
4-4
4.2 Lubricating oil・Coolant・Fuel
4.2.1 Engine oil
Viscosity of engine oil greatly affects startability, performance, oil consumption of the engine, as well
as wear of the moving parts.
Choose appropriate oil based upon the table below according to the outside air temperature.
Relation between viscosity (SAE) and temperature
SAE Viscosity number Temperature
10W － 22°F to 50°F (－30℃ to 10℃)
30 14°F to 104°F (－10℃ to 40℃)
40 32°F to 122°F (0℃ to 50℃)
15W/40 － 4°F to 104°F (－20℃ to 40℃)
Be sure to use CD class engine oil or superior class. (Using engine oil with poor quality may shorten the
life of the engine).
Follow the designated regulations to dispose of engine oil.
4.2.2 Compressor oil
Be sure to use recommended oil listed below.
Maker and Brand of Recommended Oil
Maker Brand
HULS ANDEROL 3032
MOBIL RARUS SHC 1024
TEXACO SYN-STAR DE32
Even continuous oil replenishment cannot improve its deteriorated condition. Be sure to change the oil
completely at every scheduled interval.
Do not mix it with other brand oil, or it will cause poor performance and shorten the life of the compres-
sor oil. (But fresh compressor oil could accept a mixture of small amount of different brands.)
Running the unit with old and deteriorated compressor oil will cause damage to bearings, or serious ac-
cident like ignition in a separator receiver tank. Be sure to change the oil completely at every scheduled
interval.
Follow the designated regulations to dispose of compressor oil.
Oil should use the recommendation oil
Oil should use the recommendation oil