MMD Equipment 185S-6C1 - Manual (Page 15)

2.Part Names
2-1
2.1 Internal Components and Part Names
4 5 6 7 8 9 10 11 12
No. Description Function
1 Separator receiver tank For separating compressor oil from compressed air sent into the tank.
2 Pressure regulator For regulating intake air volume.
3 Pressure control valve For keeping the receiver tank pressure higher than 0.4MPa in the tank.
4 Speed regulator For regulating compressor revolution speed.
5 Air filter(For compressor) For filtering the dust floating in the intake air.
6 Engine oil level gauge For checking engine oil level.
7 Air filter(For engine) For filtering the dust floating in the intake air.
8 Engine oil filler port For supplying and replenishing engine oil to engine.
9 Compressor oil filter For filtering compressor oil circulating in the system.
10
Fuel filter
(sedimenter built-in type)
For filtering dust and foreign matter mixed or to be mixed in the
fuel oil.and for separating water mixed or to be mixed in the fuel oil.
11 By-pass valve For keeping compressor oil at proper temperature.
12 Oil cooler For cooling compressor oil circulating in the system.
13 Exhaust muffler Equipment which muffles an engine exhaust sound.
14 Reserve tank For feeding cooling water.
15 Oil cooler drain valve For draining condensate accumulated at the bottom of oil cooler.
16 Fuel tank For storing diesel fuel oil.
17 Compressor oil filler port For supplying and replenishing compressor oil.
21 20 19 18 17 16 15 14 13
A070302
1 2 3