Metz MECABLITZ 52 AF-1 digital Pentax - Manual (Page 157)

157
9.1.2 Setting the exposure correction (EV) on
the master flash unit
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and set the desired exposure
correction (e.g. +1).
• Press the sensor button for the desired
exposure correction value .
The setting is adopted immediately.
EV
+1
9.1.3 Remote channel settings
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "CHANNEL".
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select a remote channel,
e.g .
• Press the sensor buttons on the touch dis-
play e.g. for the channel selected.
The setting will take effect immediately.
The channel setting can be checked by pres-
sing the sensor button
.
2 CH
2 CH
INFO
CHANNEL
PARA
D
REMOTE
MASTER
INFO
Z
OOM
35
mm
EV
REMOTE
MASTER
INFO
Z OOM 35 mm
EV
+1
+ 2/3
+ 1
+ 1 1/3
k
ZOOM
CHANNEL
1
2 CH
3