Metz MECABLITZ 52 AF-1 digital Pentax - Manual (Page 148)

148
Setting the mode of operation
• Switch on the flash unit with the ባ
button.The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select the desired mode
of operation.
• Press on the selected mode of operation
that is highlighted in black. The setting is
adopted immediately.
• Set a suitable mode of operation on the
camera, e.g. P, S, A etc.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
Set exposure correction
Exposure correction (EV) can be set in P TTL
flash mode
.
Setting the mode of operation
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and set the desired exposure
correction (e.g. +1).
• Press the sensor button for the desired
exposure correction value .
The setting is adopted immediately.
6.2 Automatic P TTL Fill-in flash mode
The automatic P TTL fill-in flash mode is acti-
vated by most cameras when the automatic
programme P is selected and by Vari or sub-
ject programmes during daylight (see camera
operating manual).
Fill-in flash mode overcomes troublesome
shadows and produces a more balanced
exposure between subject and background
with contre-jour shots.
The camera’s computer-controlled metering
system sets the most suitable combination of
shutter speed, aperture and flash output.
+1
EV
P TTL
52AF-1
PEN
P TTL
P TTL HSS
M
INFO 1/1
7,9 m
Z
OOM 35 F4.0 m
m
INFO
EV
0,7 -7,9 m
Z OOM 35 F4.0 m
m
P TTL
INFO
EV
0,7 -7,9 m
Z
OOM 35 F4.0 m
m
P TTL
+ 2/3
+ 1
+ 1 1/3
k