Metz MECABLITZ 52 AF-1 digital Olympus - Manual (Page 156)

10.4.5 Switching-off SERVO flash mode
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select the desired mode
of operation, e.g
.
• Press the sensor button on the touch
display for the mode of operation, e.g
.
The selected mode of operation is adopted.
TTL
TTL
11 OPTION menu
11.1 Modelling light
The modelling light is a high-frequency
stroboscopic flash. It creates the impression
of a semi-permanent light for a duration of
about 3 seconds. The modelling light enab-
les the user to assess light distribution and
the formation of shadows before taking
pictures.
The modelling light is triggered with the
manual firing button
ቧ.
Setting procedure
• Press the ቨ button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select "MOD.LIGHT".
• Press the sensor button on the
touch display.
• Press the or sensor button on
the touch display and switch the modelling
light on or off. The setting is adopted
immediately.
After activation of the modelling light,
"MOD.LIGHT" appears in the INFO menu.
D
OPTION
MOD. LIGHT
ON OFF
156
k
INFO 1/16
M-SERVO
Z OOM 24 mm
SYNC
SLAVE
SERVO
TTL
M
Off
MOD.LIGHT
On
STANDBY
MOD.LIGHT
AF BEAM