Metz MECABLITZ 52 AF-1 digital Olympus - Manual (Page 143)

Setting the mode of operation
• Switch on the flash unit with the ባ
button. The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last (e.g. M flash mode).
• Press the displayed mode of operation on
the touch display as many times as it takes
for the display for selecting the mode of
operation to appear.
• Press the sensor buttons on the
touch display and select the desired mode
of operation.
• Press on the selected mode of operation
that is highlighted in black. The setting is
adopted immediately.
• Set a suitable mode of operation on the
camera, e.g. P, Tv, Av, M etc.
• Tap the shutter release to transfer data
between the flash unit and the camera.
7.2 Automatic TTL Fill-in flash mode
The automatic TTL fill-in flash mode is
activated by most cameras when the
automatic programme P is selected and by
Vari or subject programmes during daylight
(see camera operating manual).
Fill-in flash mode overcomes troublesome
shadows and produces a more balanced
exposure between subject and background
with contre-jour shots. The camera’s
computer-controlled metering system sets
the most suitable combination of shutter
speed, aperture and flash output.
Ensure that the contre-jour light source does
not shine directly into the lens, as this will
interfere with the camera’s TTL metering
system!
There is no setting or display for automatic
TTL fill-in flash in the flash unit.
52AF-1
OLY
TTL
INFO
EV
0,7 -7,9 m
Z OOM 35 F4.0 m
m
TTL
TTL FP
M
INFO 1/1
7,9 m
Z
OOM 35 F4.0 m
m
143
+
k