Metz MECABLITZ 52 AF-1 digital Olympus - Manual (Page 152)

10.2.2 Setting the slave channel
• Press the sensor button on the touch display
for the channel group (e.g. ).
The window for selecting the channel and
group appears.
• Press the sensor buttons on the touch
display for the channel "CH".
• Press the sensor buttons on the
touch display and select the desired
channel.
• Press the selected channel on the touch
display.
The setting will take effect immediately.
A I CH1
10.2.3 Setting the slave group
• Press the sensor button on the touch
display for the channel group (e.g ).
The window for selecting the channel and
group appears.
• Press the sensor button on the touch
display for the group "GROUP".
• Press the sensor button on the touch
display for the desired group "A", "B"
or "C".
The setting will take effect immediately.
A I CH2
152
k
REMOTE
SLAVE
INFO
Z
OOM 35 mm
A CH
1
REMOTE
SLAVE
INFO
Z
OOM 35 mm
A CH
2
REMOTE
SLAVE
INFO
Z
OOM 35 mm
B CH
2
1 CH
A GROUP
2 CH
A GROUP
2 CH
3
1
GROUP
A
4 B
C
REMOTE
SLAVE
INFO
Z
OOM 35 mm
A CH
2