Metro C200 Insulated Heated Cabinet - Manual (Page 8)

7
C200 Series Door Replacement Parts Diagram
REPLACEMENT PARTS LIST
Item # Part # Description
1 RPC11-274 Door Latch
2 RPC06-414 Door Gasket
3 RPC14-042 Hinge
C200 SERIES
DOOR REPLACEMENT
PROCEDURE CHART
PART TO BE REPLACED REPLACEMENT PROCEDURE
1. Door Latch 1. Remove screws securing latch
to door.
2. Replace with part number
RPC11-274.
2. Door Gasket Replace with part number RPC06-414.
1. Remove door from unit. Remove
screws securing inner door panel
and gasket.
2. Lift panel and gasket from door.
3. Position new gasket and inner
panel back on door.
4. Secure with hardware.
5. Mount door back on cabinet.
3. Door Hinges Replace with part number RPC14-042.
1. The replacement is supplied in two
parts; the lower portion mounts to
the cabinet; the upper portion
mounts to the door.
2. To replace the cabinet hinge section,
remove screws and secure new
hinge section.
3. To replace the door hinge section,
remove the hinge cap from
the body. Remove screws.
4. Pop cap from new hinge section.
Attach hinge to door. Install cap.
NOTE: When hinges are replaced
on left-hand hinging door, the white
nylon bushing must be rotated for
the self-closing feature. See Section
II A, Step No. 5.
PART TO BE REPLACED REPLACEMENT PROCEDURE