Metro C200 Insulated Heated Cabinet - Manual (Page 7)

6
C200 SERIES
CABINET REPLACEMENT
PROCEDURE CHART
(Pass-Thru Model Shown)
PART TO BE REPLACED REPLACEMENT PROCEDURE
1. Module For a stainless steel module using
1. Assembly an analog thermometer, replace with
part number RPHMT2000. For a
stainless steel module using a digital
thermometer, replace with part
number RPHMT2000D. For an
aluminum module using an analog
thermometer, replace with part
number RPHMT2000N. For an
aluminum module using a digital
thermometer, replace with part
number RPHMT2000ND.
1. See page 8, Section B, Step #1 for
module replacement procedure.
2. Top Door For right-hand hinging stainless
2. Assembly steel door, replace with part number
RPC200-8000; for left-hand hinging
stainless steel door, replace with
part number RPC200LH-8000. For
right-hand hinging aluminum door,
replace with part number
RPC200N-8000. For a left-hand
hinging aluminum door, replace with
part number RPC200NLH-8000.
1. Lift the door up off the hinges.
2. Position door and drop door hinge
down on cabinet hinge.
3. Bottom Door 1. For right-hand hinging stainless
3. Assembly steel door; replace with part
number RPC200-8100; for left-
hand stainless steel, replace with
part number RPC200LH-8100. For
right-hand hinging aluminum door,
replace with part number
RPC200N-8100. For left-hand
hinging aluminum door,
replace with part number
RPC200NLH-8100.
4. Swivel Replace with part number B5DN.
4. Caster 1. Follow instructions for item 5,
caster with brake.
5. Caster Replace with part number B5DNB.
5. with Brake 1. Lay cabinet on its side.
2. Remove hardware holding caster
to chassis.
3. Replace with new caster and
assemble with hardware.
6. Water Pan Replace with part number
RPC200-PAN.
7. Chimneys 2 per unit. Replace with part numbers:
Right-hand chimney RPC200N-1400;
Left-hand chimney RPC200N-1500.
1. Remove thumb screw holding
chimney in place.
2. Remove chimney.
3. Replace with new chimney.
4. Secure with thumb screw.
PART TO BE REPLACED REPLACEMENT PROCEDURE
8. Model C4SC Replace with part number C4SC
8. Slide Rack (consists of 1 pair of racks — 2 pair
can be used in unit)
9. Adjustable 1. To replace or add the adjustable
9. Model 2V Slide slide, order part number
RPC75N-1112.
10. Model 2CVSN Replace with part number 2CVSN
10. Slide Rack (consists of 2 pair slides and 10 pair
of adjustable slides)
1. Liff racks up off of hangers
2. Install new racks
11. Model 2C8N Replace with part number 2C8SN
11. Slide Rack (consists of 2 pair slides).
1. Liff racks up off of hangers.
2. Install new racks.
12. Model 2C4V Replace aluminum racks with 1 pair
12. Slide Rack of RP2CVN slides and wire racks with
part number RPC4SL-SING. Follow
instructions listed above for other
slide racks.
13. Model 2C8VN Replace fixed rack with 1 pair
13. Slide Rack RP2C8N. Replace adjustable racks
with 1 pair of part number RP2CVN.
14. Model 2C84N Replace aluminum slides with part
14. Slide Rack number RP2C85N (1 pair) and wire
racks with RP2C8SN (1 pair).