Metro Case Carts - Manual

InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA USA 18705
For Product Information Call: 1-800-992-1776
Visit Our Web Site: www.metro.com
INSTRUCTIONS
FOR USE
Case Carts
INSTRUCTIONS
FOR USE
For Metro Case Carts
REMOVE ALL PROTECTIVE COVERING FROM
THE EXTERIOR OF THE CART. COVERING
MUST BE REMOVED BEFORE PLACING THE
CART INTO SERVICE.
DOORS
Door Latch
1. To open, lift up on latch paddle to open the
door(s) (Fig. 1). On double door units, the right
door must be opened before the left door. To
close, swing door(s) back into cart.
Fig. 1
Side Door Catch
1. To lock the door(s) in the open position, simply
push the door(s) in against side of unit (Fig. 2). To
disengage, pull door(s) outward away from unit.
Fig. 2
Grease Zerk Fittings (See Fig. 3)
1. Under normal usage, the casters should be
regreased at least once a month.
2. When the unit is being cleaned in a cart wash,
it is recommended that the casters be regreased
every second week.
Foot Operated Wheel Brake Caster
Wheel brake caster can be engaged or
disengaged by applying pressure to the black
pedal mounted on the caster (Fig. 4).
Swivel Lock Caster
On carts equipped with the swivel lock caster,
facing the end of the cart which the caster
is mounted, push the arm to the far left for
swivel caster operation (Fig. 5). Push the
arm to the far right to engage the mechanism
for rigid caster operation (Fig.6)
WIRE & SOLID SHELVES
Each shelf is supplied with a left and right
shelf slide.
To Install Shelf Slides:
1.
with the notched end toward the back. At
the desired height insert the slide’s rear
rivet head into the rear keyhole slot at the
rear of the cart and slide back once
engaged. Align and insert the slide’s front
rivet head with the front keyhole slot and
push down once engaged (Fig. 7, wire
pullout slide; Fig. 8, roller shelf slide).
Repeat for the other side.
Fig. 7
2. To adjust door catch, loosen nuts on backside
of door catch bracket (under cart, Fig 2A). Adjust
bracket/door catch up or down as necessary, and
tighten nuts.
Fig. 2A
Optional Passive Lock Security Latch
1. Install Metro Security Seal (sold separately)
into latch hasp as shown in Fig 1A. To gain
to the cart, simply lift latch to break security seal.
Fig. 1A
Fig. 3
Fig. 4
CASTERS
Fig. 6
Fig. 5
Take a shelf slide and position in the cart
Fig. 8