Denon ADV-1000 - Manual (Page 56)

56
ENGLISH
(2) Adjusting the picture quality
• The quality of the picture when playing discs can be adjusted.
VOLUME
ENTER
MODE
MENU FUNCTION
DISPLAY RETURN INPUT MODE SURROUND
TV/VCR SLEEP
CALL 0 +10
VCR POWER
TV POWER TV POWER
POWER
CH
1, 2, 3, 4
4
1
1, 2, 3
PICTURE MODE PICTURE MODE
SOFT SOFT
MEMORY1
MEMORY1
SHARP SHARP
STANDARD STANDARD
MEMORY2 MEMORY2
MEMORY3
MEMORY3
ENTER
1
When playing a disc with the function set to DVD, press the
DISPLAY button to turn on the on-screen display, use the and
cursor buttons to select “Picture Quality”, then
press the ENTER button.
• The picture quality adjustment screen appears.
• The on-screen display also turns on when the DISPLAY button
is pressed in the stop mode. Remote control unit
Remote control unit
\
ENTER
Remote control unit
\
2
Use the and cursor buttons to select the item, then press the ENTER
button.
STANDARD:
The picture quality and functions are all reset to the standard values set upon
shipment from the factory.
SHARP:
The picture is sharper.
SOFT:
The picture is softer with less noise.
MEMORY 1 to 3:
You can make three image quality adjustments and store them at memory
places 1 to 3. (Set in step 3.)
INTERLACE INTERLACE
CONTRAST CONTRAST 0
DARKER DARKER
MEMORY2
SHARPNESS SHARPNESS
HUE HUE
BRIGHTNESS BRIGHTNESS
SHARPNESS SHARPNESS
GAMMA GAMMA
PROGRESSIVE PROGRESSIVE
0
0
0
0
0
LIGHTER LIGHTER BLACK LEVEL BLACK LEVEL
3
Use the and cursor buttons to select the item, then press the ENTER
button.
• If memory 1 to 3 was selected in step 2, the selected memory settings are
displayed.
• With interlace images, the contrast, brightness, sharpness and hue can be
adjusted and stored in the memory.
CONTRAST (-6 to +6):
Adjusts the contrast between bright and dark parts of the picture.
BRIGHTNESS (0 to +12):
Adjusts the picture’s brightness.
SHARPNESS (-6 to +6):
Adjusts the picture’s contours.
HUE (-6 to +6):
Adjusts the balance between green and red. (This setting does not affect
progressive scan outputs.)
• With progressive images (D terminal), the sharpness and gamma correction can
be adjusted and stored in the memory.
SHARPNESS (-5 to +7):
Stresses the outlines of the image.
GAMMA (-6 to +6):
Select this if the dark parts of images are obscure or the bright parts are
brighter than necessary.
ENTER
Remote control unit
Remote control unit
\