Denon ADV-1000 - Manual (Page 28)

28
ENGLISH
[2] Setting the speaker distance
• Input the distances from the listening position to the speakers and
set the surround delay time.
• The default settings below are set upon shipment from the factory.
Preparations:
Measure the distances from the listening position to the speakers (L1
to L3 on the diagram at the right).
1 To perform these operations from places other than the
system setting change menu, see page 26.
2 At the SYSTEM SETUP MENU select “DELAY TIME”.
• Switch to the DELAY TIME screen.
3 When “YES” is selected for “DEFAULT”, the delay times for
the various speakers are set to the default values.
4 Select the speaker to be set using the and cursor
buttons, then setting the distance between the speakers and
the listening position using the
and cursor buttons.
• Set the distance between the center speaker and listening
position.
The distance changes in units of 1 foot (0.1 meters) each
time the button is pressed. Select the value closest to the
measured distance.
5 Enter the setting.
• The SYSTEM SETUP MENU reappears.
FR FL
SR SL
Center
B
9 f t 9 f t
8 f t
8 f t
7 f t
7 f t
FINISH: ENTER BUTTON
DELAY TIME
SEL ECT :
METERS METERS F E E T F E E T
S E T T H E D I S T A N C E T O E A C H S P E A K E R S S E T T H E D I S T A N C E T O E A C H S P E A K E R S
D E F A U L T D E F A U L T
FRONT&SW FRONT&SW
CENTER CENTER
SURROUND SURROUND
U N I T U N I T
B
8 f t 8 f t
7 f t 7 f t
FINISH: ENTER BUTTON
DELAY TIME
SEL ECT :
METERS METERS F E E T F E E T
S E T T H E D I S T A N C E T O E A C H S P E A K E R S S E T T H E D I S T A N C E T O E A C H S P E A K E R S
D E F A U L T D E F A U L T
FRONT&SW FRONT&SW
CENTER CENTER
SURROUND SURROUND
U N I T U N I T
9 f t 9 f t
ENTER
L 1 : Distance from center speaker to
listening position
L 2 : Distance from front speakers to
listening position
L 3 : Distance from surround speaker to
listening position
ENTER
• Use the and cursor buttons to select the distance
unit, “METERS” or “FEET”.
Press the
cursor button to proceed to the next step if
you do not wish to change this.
B YES: FRONT & SW / 9ft
CENTER / 8ft
SURROUND / 7ft
B NO: The current settings are used.
The difference of the distances set for the different
speakers must be no greater than 10 ft (3.0 m).
If an inapplicable distance is set, “CAUTION: INVALID
DISTANCE” is displayed. Change the speaker position and
reset.
Listening
position
Remote control unit Remote control unit
Remote control unit