Denon ADV-1000 - Manual (Page 54)

ENGLISH
54
• The ADV-1000 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and
the disc on the screen when the function is set to DVD.
q Setup screen
• This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-1000 and various settings
when playing discs (system setting change and DVD setting change).
• The setup screen can be used regardless of the currently set function, but it cannot be operated while a disc is playing. Set the stop mode
first.
w Display of disc information
• When the function is set to DVD, the OSD displays information on the disc and appears when various playback functions are operated.
e Display of surround function
• When the function is set to DVD, information on the surround amplifier is also displayed and can be operated.
• The OSD for the surround function (AV OSD) can be turned on and off.
(The OSD for the setup screen and DVD disc information cannot be set to “OFF”.)
Set to “ON” upon shipment from the factory.
17 ON-SCREEN DISPLAY
1
2
VOLUME
ENTER
BAND
MODE
MENU FUNCTION
DISPLAY RETURN INPUT MODE SURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE AUDIO
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
DVD
TV/VCR
CH
VOL
SLEEP
ON
OFF
REMOCON MODE
2 3
4 5 6
8 9 CLEAR
CALL 0 +10
7
1
STATUS
CDR/MD/TAPE TUNER/TV/VCR
VCR POWER VCR POWER
TV POWER TV POWER
TV
VCR
NTSC/PAL
MEMO
POWER POWER
CH
CH
CH
1
2 2
1 With the function set to DVD, press the STATUS button for at
least 2 seconds.
• “AV OSD ON 0:1 OFF” is displayed.
STATUS
STATUS
Remote control unit Remote control unit
The current setting is displayed in green.
2 Turn the AV OSD on or off.
FUNCTION
/ SELECT
Main unit Remote control unit
or :ON
or :OFF
After several seconds, the display turns off and the setting is
made.
NOTES:
• Depending on the disc being played, the picture may be
disturbed when the OSD turns on. This is not a malfunction.
If this should happen, set the AV OSD to “OFF”.
• The OSD is also output to the VCR video output terminals.
Do not perform setup or OSD operations while recording with a
video deck.