Denon ADV-1000 - Manual (Page 31)

31
ENGLISH
C 8 1:02:46
DVD AUTO DIG DIGITAL
2 Set discs in the disc tray with the labeled (printed) side facing up.
8 cm disc guide
Disc tray
NOTE:
• Do not move the this unit while a disc is playing. Doing
so may scratch the disc.
(1) Opening and Closing the Disc Tray
q Turn on the power.
w Press the OPEN/CLOSE button.
C 8 1:02:46
DVD AUTO DIG DIGITAL
Disc tray
Power button
OPEN/CLOSE button
NOTES:
• Even when the power is in the standby mode, when the
OPEN/CLOSE button is pressed, the ADV-1000’s power
turns on and the disc tray operates. (Auto power on
function)
• Even if the function is set to something other than DVD,
when the OPEN/CLOSE button is pressed, the function
switches to DVD and the disc tray operates. (Auto
function select function)
• Do not strike on the button with a pencil, etc.
12 cm disc guide
2
(2) Loading Discs
• Pick up the disc carefully so as not to touch the signal surface
and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs in
the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is automatically
loaded.
• The disc tray can also be closed automatically to load the disc
by pressing the PLAY button.
C 8 1: 02: 46 DVD AUTO DIG DIGITAL
Figure 1
Outer disc tray
12 cm disc
C 8 1: 02: 46 DVD AUTO DIG DIGITAL
Figure 2
Inner disc tray
8 cm disc
NOTES:
• If a foreign object is caught in the disc tray during closing,
simply press the OPEN/CLOSE button again and the tray
will open.
• Do not press the disc tray in by hand when the power is
off. Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so will
damage it.
TV/VCR
CH
VOL
SLEEP
ON
OFF
2 3
4 5 6
8 9 CLEAR
CALL 0 +10
7
1
VCR POWER VCR POWER
TV POWER TV POWER
TV
VCR POWER POWER
CH
CH
CH
2
(1) Before Operating
(2) Loading Disc
1 Refer to “CONNECTIONS” (pages 8 to 15) and check that all
connections are correct.
2 Turn on the power.
Press the POWER
button.
When pressed, the power turns on and the display lights. The
sound is muted for several seconds, after which the unit
operates normally. When pressed again, the power turns off,
the standby mode is set and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state,
the apparatus is still connected on AC line voltage. Please be
sure to unplug the cord when you leave home for, say, a
vacation.
11 PLAY BACK
ON / STANDBY
ON
POWER POWER
Light
(green)
Main unit Remote control unit