Configuration, Table of possible pulse periods – Meinberg HSC509 User Manual

Page 19

Text mode
Original mode

Configuration

This menu lets the user configure the serial outputs:

Pic. 3.0: Menu 6

Baudrate

The baudrate is settable for COM0 and for COM1 in the following steps: 600, 1200,
2400, 4800, 9600, 19200, 38400 and 57600. The framing is settable as follows: 7E1,
7E2, 7O2, 7N2, 8E1, 8N1 or 8N2.

Output Mode

Both of the serial ports send a time string in three different output modes. Either on
request only ("auf Anfr."; sending a '

' -ASCII-Code 3Fh- to the clock), once per

second ("sekuendl.") or once per minute ("minuetlich").

This manual is related to the following products:

UA509P