Meinberg HSC509 - Manual (Page 14)

14
Menu Day Plan
This menu lets the user assign a plan to a corresponding day of week. The cursor starts at
"Mo" (monday) and can be stepped to the next day by pressing NEXT.
Pic. 2.3: Menu 2
Pressing INC increases the no. of the plan (01 ... 08) while CLR/ACK saves the
edited plan to the RAM. Pressing INC and CLR/ACK clears the plan of the currently
active day.
Programming a Plan
A Plan is a programmed sequence of several switching times. A plan consists of up
to 64 switching programs (PRG). A switching program is a set of a switch-on time
(EIN), a switch-off time (AUS) and the corresponding relay (Rel.). Up to eight plans
can be configured and assigned to any day of the week or holyday.
To program the plans and switching programms the MENU key is to press in order
to enter menu 3. The following is displayed:
Pic. 2.4: Menu 3
Select a Plan
The no. of the plan to edit (01 ... 08) can be choosen by pressing INC while the
cursor appears at the corresponding position (PLAN).