Meinberg HSC509 - Manual (Page 13)

13
The Menus in Detail
Root Menu
The root menu is shown when the receiver has completed initialization after power-
up. The first two lines of the display show the time zone (as defined in the setup
menu), the actual time and the date. The third line shows the user if one of the relay
output is applied with an impulse (I). The last line shows if an output is currently
active (*) or not (-).
* means relay on
- means relay off
I means relay applied with cyclic pulse
If the INC key is pressed from the root menu a submenu is displayed showing the
receiver´s software revision:
Pic. 2.2: Submenu 1
Pressing MENU or INC again lets the menu return to the root menu.