Meinberg GPS170LCD-MP - Manual (Page 37)

37
Technical Specifications GPS170
RECEIVER: 6 channel C/A code receiver with external
antenna/converter unit
ANTENNA: Antenna/converter unit with remote power supply
refer to chapter "Technical Specifications GPS170 Antenna"
ANTENNA
INPUT:
antenna circuit DC-insulated; dielectric strength: 1000V
Length of cable: refer to chapter "Mounting the Antenna"
LC DISPLAY: 2x40 character, menu selectable by push buttons
TIME TO SYNCHRO-
NIZATION:
one minute with known receiver position and valid almanac
12 minutes if invalid battery buffered memory
PULSE
OUTPUTS:
change of second (P_SEC, TTL level)
change of minute (P_MIN, TTL level)
ACCURACY OF
PULSES:
after synchronization and 20 minutes of operation
TCXO HQ/OCXO LQ
: better than ±250 nsec
OCXO MQ/OCXO HQ : better than ±100 nsec
OCXO DHQ : better than ±100 nsec
better than ±2 µsec during the first 20 minutes of operation
FREQUENCY
OUTPUTS:
10 MHz, 1 MHz, 100 kHz (TTL level)