Meinberg GPS170LCD-MP - Manual (Page 22)

22
Menu SV POSITION
This menu gives information on the currently selected satellite (SV). The satellite´s ID
number, its elevation, azimuth and distance from the receiver position reflect the
satellite´s position in the sky whereas the doppler shows whether the satellite is
coming up from the horizon (doppler positive) or going down to the horizon (doppler
negative). All satellites in view can be monitored by using the NEXT key.
SATELITE 4 INFO: El: 17° AZ: 204°
Dist: 24000 km Dopp: -3.550 kHz
Menu USER CAPTURE
The time of the last recent capture event is displayed in this menu. The time zone
depends on the parameters entered in the setup menu (see below). The NEXT key lets
the display toggle between the two capture channels. If an error message ("Cap.
Overrun" or "Cap. Buffer Full") is displayed in the second line it can be acknowledged
pressing the CLR/ACK key.
USER CAP0
UTC DD.MM.YYYY 12:00:00.1234567
USER CAP1
NA
Menu SETUP
From this menu, several topics can be selected which let the user edit parameters or
force special modes of operation. A specific topic can be selected using the NEXT
key. Depending on the current topic, pressing the CLR/ACK key either enters edit
mode with the selected set of parameters or switches to the selected mode of operation
(after the user has acknowledged his decision). Once edit mode has been entered, the
NEXT key lets the cursor move to the digit or letter to be edited whereas the INC key
increments the digit or letter under the cursor. If changes have been made, the CLR/
ACK key must be pressed in order to save those changes in the battery buffered
memory, otherwise all changes are discarded when the user presses the MENU key in
order to return to the SETUP display.