MEGAPOWER MVP-886 - Manual (Page 5)

- 1 -
1 WARNING
TO AVOID FIRE OR LEAKAGE OF ELECTRICITY, PLEASE
KEEP THIS VISUALIZER DRY. REFER SERVICING TO
QUALIFIED PERSONNEL. DO NOT TRY TO FIX IT BY
YOURSELF.
1．Check the voltage and frequency before any operation. Please
make sure that the supply power is dynatron. 0-wire, live wire,
and ground wire must be fine connected.
2．To avoid static high-volt strike, please connect ground wires
correctly. Do not move cables without shutting off the electricity.
3．Do not try to change the structure. Do not operate with shell
open.
4．Keep it away from tinderbox, liquid, or metal. Do not capture
image when it is facing to the sun. It is recommended to operate
in gloomy surroundings.
5 ． Keep this instrument away from bad situation like high
temperature, wet, caustic gases, dusty, or shaky. Place it on a
STABLE desk. Object weight should be less than 1kg.
6．Cut off electricity before cleaning. Please clean it with dry cloth.
Do not use thinner, volatile gas, or insecticide.
7．Release the power plug when it is left unused.
8．Keep children away from this instrument.
9．Cut off electricity when abnormal signal occurs such as noise or
smoke, plug needs to be removed too.