MEGAPOWER MVP-886 - Manual (Page 23)

- 19 -
7 IMAGE FUNCTION
Buttons:【SAVE】/【DELETE】/【PLAY】/【CONTRAST】/【PRE】
/【NEXT】. They also can be carried out through software.
7.1 【SAVE】
Memory capacity is 20 images. Press 【SAVE】 button to capture
current image. Images are stored orderly. To replace one, you
need to choose it first, then press 【SAVE】 button, the old
image will be replaced.
Notes:
①
If position No.1 and No.2 are stored, new image will be stored in
position No.2,and then position No.4.
② If memory capacity is full, new image will cover No.1 image,
and then No.2 etc.
③ Images will be lost when restart system.
7.2 【DELETE】
Under “Play” or “Contrast” mode, press 【DELETE】 button, you
will read “Delete?” on the screen. Then repress 【DELETE】
button to confirm the deletion. Or you can chose a image first by
【
PRE】 or 【NEXT】 button, then delete it.
Delete all: You can delete all images through software.
7.3 【PLAY】
Press 【PLAY】 button to play all stored images orderly. You
can review all images back and forth by【PRE】/【NEXT】. Or
you can choose an image first, and then play it.
Repress 【PLAY】 button to quit play mode.
Note:① You will read “No images” on the screen when you