Measurement Computing PCM-DAC02 - Manual (Page 7)

3 INTERFACING
The PCM-DAC02 connector has two single-ended analog outputs, one interrupt input,
eight digital inputs/outputs and three ground pins. A chassis ground is in the cable
shield clips to either side of the 15 pins of the connector.
3.1 PCM-DAC02 CONNECTOR
Figure 3-1 shows a PCM-DAC02 case looking into the connector. The KEY helps to
insure that the cable is inserted in the correct orientation.
Figure 3-1. PCM-DAC02 I/O Connector
Analog devices to be controlled should be connected with the high side to the
numbered analog output and the low side to an adjacent ground.
3