Measurement Computing USB-4302 - Manual (Page 9)

9
Chapter 2
Installing the USB-4302
What comes with your USB-4302 shipment?
Hardware
 USB-4302
 USB cable (2 meter length)
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf ). This booklet supplies a brief description of
the software you received with your USB-4302 and information regarding installation of that software. Please
read this booklet completely before installing any software or hardware.
Unpacking the USB-4302
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-4302 from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:

Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
 Fax: 508-946-9500 to the attention of Tech Support
 Email: [email protected]