Measurement Computing STLITE-PCI-8x - Manual (Page 8)

4
of the cover. Use care not to damage the connection when lifting off the cover. You can temporarily disconnect
the cable connector if you wish. See Figure 3-2 below
.
Figure 3-1. PCI Expansion Chassis – Cover Screws Locations
Figure 3-2. Optional Temperature Sensor PC Board - Under Cover
3.4 PCI EXPANSION CABLE INSTALLATION
1. Position the chassis within easy reach of the three-foot cable.
2. Attach the cable to the Host PCI Bridge card. Secure it firmly by tightening both captive thumbscrews on
the connector.
3. Attach the cable to the Chassis PCI Bridge card. Secure it firmly by tightening both captive thumbscrews on
the connector.