Measurement Computing STLITE-PCI-8x - Manual (Page 19)

15
8.2 STLITE-PCI-8T, STLITE-PCI-8T+
Typical for 25°C unless otherwise specified.
Features
Slots 8 PCI slots: 4 full-length PCI, 4 half-length PCI
PCI Bus Embedded industry standard bridge, Intel 21150-AC.
32 bit, 33 MHz.
Power Supply 250W ATX Style
Line Voltage Input 115VAC/10A or 230VAC/5A, switch selectable. 50/60Hz.
Volts Minimum Load Maximum Load Tolerance Power
1
+3.3V
2
0.2 Amps 14 Amps ±10% 46W
+5V 2.0 Amps
4
27 Amps ±5% 135W
+12V
3
0.2 Amps 9 Amps ±5% 108W
-12V 0.0 Amps 0.5 Amps ±10% 6W
Power Ratings
(1) Total Power not to exceed 250W
(2) Backplane circuits consume 0.4 A from the +3.3V supply.
(3) The fan and system monitoring hardware consume 0.3 A from the +12V
supply.
(4) For some ATX power supplies, if the minimum load is not drawn from the
+5V supply, the -12V supply may be out of tolerance.
Certification UL
CE
CSA
FCC Class A Approved
Connector Shielded 80-pin SCSI D-type. Interfaces with Measurement Computing’s
Satellite Series bus expansion products.
Cable STLITE-C-3. Three foot shielded ribbon, 80 pin D-type.