Measurement Computing Personal Daq rev.6.0 Quick Start - Manual (Page 11)

Personal Daq Quick Start 878495 p/n 491-0940, Rev 6.0 9
A Brief Guide to Using Personal DaqView
Once your Personal Daq system has been properly connected to the PC and to the desired input signals, the
following steps may be used to start Personal DaqView and begin collecting data. For this “Quick Start” approach
to collecting data we will be making use of the program’s default settings.
Note that acquisition settings can be changed from the Configure Acquisition Window. This window is accessed via
the Configure Acquisition button (8). For ease of reference, related screen captures have been provided below.
1. From Windows, open Personal DaqView by double-clicking on the Personal DaqView icon, or by using the
Windows Desktop Start Icon to access the Personal DaqView program.
Once the program is executed, the software identifies your Personal Daq device and brings up the Main Control
Window and Channel Configuration Window (with the Analog Input Spreadsheet Selected).
Note: If the Channel Configuration Window is not visible, press button (9).
2. Select the tab for the desired spreadsheet. Analog Input is the default. Note that the Frequency/Pulse Input
and Digital Input/Output tabs do not apply to Personal Daq/54.
3. Ensure the desired channels are enabled. Double-click in a channel’s On/Off cell to enable or disable a
channel, as applicable.
4. If you want to record data to disk, click on button (4) Arm Trigger for Disk Recording. The data acquisition
begins and data is stored to a disk file as indicated in the Data Destination Window. Note that the default
destination, including the default file name of
PDAQ.BIN , is as follows:
C:\PROGRAM FILES\PDAQVIEW\PDAQ.BIN . You can, of course, specify a different location.
5. To see real time readings on the Channel Configuration Window, click on the Update All Indicators button
(10), or on the Enable Readings Column button (16).
6. If you want to read data, but not record to disk, click on button (10) or (16), but not button (4). In addition to
the Channel Configuration Windows reading column, you can click on one or more display icon buttons (11,
12, 13, or 14) to see your data in the form of a chart or meter. You can view all display types, or a combination
of them, at the same time.
Display options, listed as button number followed by display type, are:
(11) scrolling charts (12) bar graph meters (13) analog meters (14) digital meters
Main Control Window*
Channel Configuration Window with Analog Input Spreadsheet Selected*
*Button descriptions are provided on page 5 of this document.