Measurement Computing GPIB-488.2 - Manual (Page 26)

3-8 IOtech to Associated MCC APIs
986992 GPIB 488.2 Porting Guide
IOtech GPIB Commands Associated MCC GPIB 488.2 Command(s)
DigArm
DigArmSetup
DigRead
DigSetup
DigWrite
No Equivalent Commands
Syntax
The syntax for these commands is no longer valid.
Usage Notes
The above-listed digital commands applied to AT488pnp, PCI488, but to no other devices.
There is no mechanism to convert to, or to achieve equivalent or similar functionality.
IOtech GPIB Commands Associated MCC GPIB 488.2 Command(s)
DisArm No Equivalent Commands
Syntax
INT WINAPI Disarm(DevHandleT devHandle,
ArmCondT condition);
Usage Notes
The Disarm command, no longer to be used, prevented Driver488 from invoking an event
handler and interrupting the PC, even when the specified condition occurred.
Similar functionality can only be achieved by coding efforts, of such magnitude, that they are
beyond the scope of this document.